B2816 Daewoo Auto Trouble Code
B2816 Daewoo OBD2 may also be triggered by faults earlier down the line. For example, a dirty MAF sensor might be causing the car to overcompensate in its fuel-trim adjustments. As a result, oxygen sensors are likely to report fuel mixture problems.
The computer notices the canister is empty when it detects a leaner condition (all the vapors are used up) and it resumes normal fuel delivery. Some car manufacturers then close the vent solenoid but leave the purge solenoid open. That creates a vacuum throughout the entire fuel storage system. Once the correct vacuum is reached, it closed the purge solenoid and waits to see if the vacuum holds.
B2816 Daewoo Possible Solution:
Power Steering Pressure (PSP) Switch Malfunction In Key On, Engine Off Self-Test, this DTC indicates the PSP input to the PCM is high. In Key On, Engine Running Self-Test, this DTC indicates that the PSP input did not change state. Steering wheel must be turned during Key On, Engine Running Self-Test PSP switch/shorting bar damaged SIG RTN circuit open PSP circuit open or shorted to SIGRTN PCM damaged.
B2816 Daewoo Description For All Models :
- Daewoo Arcadia
- Daewoo Brougham
- Daewoo Bucrane
- Daewoo Chairman
- Daewoo Espero
- Daewoo Evanda
- Daewoo Joyster
- Daewoo Kalos
- Daewoo Korando
- Daewoo Lacetti
- Daewoo Lanos
- Daewoo Leganza
- Daewoo Maepsy-na
- Daewoo Magnus
- Daewoo Mantica
- Daewoo Matiz
- Daewoo Musiro
- Daewoo Musson
- Daewoo Nexia
- Daewoo No 1
- Daewoo Nubira
- Daewoo Prince
- Daewoo Rexton
- Daewoo Rezzo
- Daewoo Royale
- Daewoo Tacuma
- Daewoo Tosca
- Daewoo Vada
- Daewoo Winstorm
|
B2816 Daewoo Trouble Repair :
B2816 Daewoo code shows that location the body harness connector, located in and around the left hand kick panel area or inside the IP (consult a shop manual for location). Water can leak into the connector from clogged sunroof drains, A-pillar leaks, or windshield or cowling leaks. |
Code Search
Please fill the search bar to find Auto Trouble Code meaning.